Description
Autoclaves Sliding Door Type Series- Speedy Autoclave With Drier SDL-320
Space-saving design minimizes laboratory space occupied.
The area required for installation is reduced to approximately 0.34m2 (W D: 605mm 565mm). The sliding door type model also minimizes door clearance to preserve valuable laboratory space.
*The control panel lighting image shown above may vary from actual display.
A real time work monitor displays 6 status indicators for each working process of the autoclave.
When the autoclave is turned on, the work monitor simultaneously indicates “Main On”. After setting parameters, the monitor displays status indicators of the current working process, including “Sterilizer”, “No Water”, “Exhaust”, “Dry” and “Finish”, which provides an at-a-glance monitoring of the operation status.
*The control panel lighting image shown above may vary from actual display.When the autoclave is turned on, the work monitor
The autoclave is designed with safety features that ensure operator safety.
Boil-dry safety mechanism
- A water level sensor is electrically responsive to the volume of water inside the chamber. If it detects low water levels, the work monitor on the control panel indicates “No Water”.
Lid open / close direction
- Lid opening/closing mechanism reduces the risk to the operator of being exposed to hot air and steam escaping from the chamber.
Current leakage breaker
- It quickly detects abnormalities in the electrical system and protects the operator against electric shock caused by any malfunction such as a short circuit.
Gravity-operated safety valve
- A safety valve fitted in the front panel allows easy monitoring of its operation status. When the pressure inside the chamber is too high, the safety valve is activated to protect the operator against hazardous conditions.
Sterilizing-Drying Process
SDL-320 employs an open heat-drying system, which performs drying with open lid after sterilization.
Specifications
| Model | SDL-320 | |
| Operating temperature range (during sterilizing) | 60 – 132°C | |
| Operating pressure range | 0 – 186kPa | |
| Maximum operating pressure | 216kPa | |
| Temperature control | Electronic | |
| Temperature display / display range | Analog / 80 – 160°C | |
| Pressure display / display range | Analog / 0 – 400kPa | |
| Heat source | 2kW electric heater | |
| Timer control | Electrically-operated | |
| Timer display | Analog | |
| Timer display range |
Sterilizing timer | 0 – 60min. 50 / 60Hz |
| Drying timer | 0 – 60min. 50 / 60Hz | |
| Safety devices | • Empty heating prevention, • Leakage breaker, • A dead weight safety valve | |
| Malfunction prevention devices | • Low water level detection | |
| Leakage breaker | Rated breaking current: | 30A (120V) , 15A (220 / 230 / 240V) |
| Rated sensed current: | 30mA (120V) , 10mA (220 / 230 / 240V) | |
| Protection type | Class 1 equipment | |
| Operating environment | Ambient temperature: | 5 – 35°C |
| Relative humidity: | 30 – 85% | |
| Atmospheric pressure: | 700 – 1060hPa | |
| Gradient: | Within 2° | |
| Dimensions | φ325 x 770mm | |
| Usable dimension | φ315 x 670mm | |
| Capacity of chamber | 55ℓ | |
| Chamber material | SUS304 | |
| Capacity / material of drain trap | 10ℓ / polyethylene | |
| Type/material of lid gasket | Accommodating internal pressure / silicone rubber | |
| Dimensions of main unit (mm) | 605W x 565D x 1080H (Height from floor to control panel:880) | |
| Net weight | 100kg | |
| Rated Voltage | AC 120 / 220 / 230 / 240V | |
| Power input | 20A (120V), 10A (220V), 9A(230 / 240V) | |
| Power supply requirements | Single-phase 120V AC (50 / 60Hz) 20A or above | |
| Single-phase 220 / 230 / 240V AC (50 / 60Hz) 15A or above | ||
| Power Consumption (calorific value) | 2kW (1720kcal/h) | |
| Accessories | • Drain trap 1, • Drain hose 1, • Warranty card 1, • Customer card 1, • Operator’s manual 1, • Stainless basket 2 (φ300 x 182mm) |
|
